Dealer version .24

MATERIALS AND SURFACES

Walk-in Closet Surfaces

Aluminium Components

C29

Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

Disponibile per le seguenti collezioni

C08

(RAL 9005) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

Disponibile per le seguenti collezioni

C30

(RAL 7022) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

Disponibile per le seguenti collezioni

C21

(RAL 7044) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

Disponibile per le seguenti collezioni

C12

(RAL 9003) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

Disponibile per le seguenti collezioni

Shelves and Cabinets

M02

Components made of wood-based panels (chipboard) in various thicknesses, surface and edged in “moka oak” finish.

Disponibile per le seguenti collezioni

M03

Components made of wood-based panels (chipboard) in various thicknesses, surface and edged in “matt white” finish.

Disponibile per le seguenti collezioni

S08

Laminam IN-SIDE is a state-of-the-art ceramic paste whose surface colouring permeates its entire thickness. The surface is scratch-proof and the ceramic layer is coupled to a fibreglass panel to increase its resistance to impact and breakage.

Disponibile per le seguenti collezioni

S07

Laminam IN-SIDE is a state-of-the-art ceramic paste whose surface colouring permeates its entire thickness. The surface is scratch-proof and the ceramic layer is coupled to a fibreglass panel to increase its resistance to impact and breakage.

Disponibile per le seguenti collezioni

S06

Laminam IN-SIDE is a state-of-the-art ceramic paste whose surface colouring permeates its entire thickness. The surface is scratch-proof and the ceramic layer is coupled to a fibreglass panel to increase its resistance to impact and breakage.

Disponibile per le seguenti collezioni

S05

Laminam IN-SIDE is a state-of-the-art ceramic paste whose surface colouring permeates its entire thickness. The surface is scratch-proof and the ceramic layer is coupled to a fibreglass panel to increase its resistance to impact and breakage.

Disponibile per le seguenti collezioni

N02

The 2 mm thick eco-touch surface is a mixture of organic origin and 100% natural (cork, jute, linseed oil).
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150 ° C) process.

Disponibile per le seguenti collezioni

N01

The 2 mm thick eco-touch surface is a mixture of organic origin and 100% natural (cork, jute, linseed oil).
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150 ° C) process.

Disponibile per le seguenti collezioni

C36

The 0.6 mm thick stainless steel surface has a vintage manually brushed finish.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

C35

The 0.6 mm thick stainless steel surface has a vintage manually brushed finish.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

C32

The 0.6 mm thick brass/stainless steel surface has a vintage manually brushed finish; the brass is protected by a film of beeswax.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

C31

The 0.6 mm thick brass/stainless steel surface has a vintage manually brushed finish; the brass is protected by a film of beeswax.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

Y39

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

Y40

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

Y37

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

Y34

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

Y36

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process

Disponibile per le seguenti collezioni

D03

La superficie in cemento di spessore 2 mm è colata in cassero e applicata all’HPL, protetta da un trattamento idro-oleorepellente.
Il supporto in HPL (high-pressure laminates) è un pannello costituito da strati di fibre di cellulosa impregnati con resine termoindurenti sottoposti ad un processo ad alta pressione (90 kg/cm2) ed alta temperatura (150 °C).

Disponibile per le seguenti collezioni

D02

The 2 mm thick concrete surface is poured into the formwork and applied to the HPL, protected by a water-oil repellent treatment.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

D01

The 2 mm thick concrete surface is poured into the formwork and applied to the HPL, protected by a water-oil repellent treatment.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

L08

Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

L06

Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

L11

Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

L10

Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

L03

Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Disponibile per le seguenti collezioni

T05

The wooden surface is treated with a layer of water-based paint.
The solid wood boards are subjected to a drying process to ensure their stability over time. The ‘finger-joint’ technique contributes to the construction of a panel that maintains flatness.

Disponibile per le seguenti collezioni

T04

The wooden surface is treated with a layer of oil for outdoors.
The solid wood boards are subjected to a drying process to ensure their stability over time. The ‘finger-joint’ technique contributes to the construction of a panel that maintains flatness.

Disponibile per le seguenti collezioni

T03

The wooden surface is treated with a layer of water-based paint.
The solid wood boards are subjected to a drying process to ensure their stability over time. The ‘finger-joint’ technique contributes to the construction of a panel that maintains flatness.

Disponibile per le seguenti collezioni

T02

The wooden surface is treated with a layer of water-based paint.
The solid wood boards are subjected to a drying process to ensure their stability over time. The ‘finger-joint’ technique contributes to the construction of a panel that maintains flatness.

Disponibile per le seguenti collezioni

T01

The wooden surface is treated with a layer of water-based paint. The solid wood boards are subjected to a drying process to ensure their stability over time. The ‘finger-joint’ technique contributes to the construction of a panel that maintains flatness.

Disponibile per le seguenti collezioni