Tops
L03
Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
L10
Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
L11
Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
L06
Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
L08
Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
D01
The 2 mm thick concrete surface is poured into the formwork and applied to the HPL, protected by a water-oil repellent treatment.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
D02
The 2 mm thick concrete surface is poured into the formwork and applied to the HPL, protected by a water-oil repellent treatment.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
D03
La superficie in cemento di spessore 2 mm è colata in cassero e applicata all’HPL, protetta da un trattamento idro-oleorepellente.
Il supporto in HPL (high-pressure laminates) è un pannello costituito da strati di fibre di cellulosa impregnati con resine termoindurenti sottoposti ad un processo ad alta pressione (90 kg/cm2) ed alta temperatura (150 °C).
Disponibile per le seguenti collezioni
Y36
The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process
Disponibile per le seguenti collezioni
Y34
The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
Y37
The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
Y39
The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
C31
The 0.6 mm thick brass/stainless steel surface has a vintage manually brushed finish; the brass is protected by a film of beeswax.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
C32
The 0.6 mm thick brass/stainless steel surface has a vintage manually brushed finish; the brass is protected by a film of beeswax.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
C35
The 0.6 mm thick stainless steel surface has a vintage manually brushed finish.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
C36
The 0.6 mm thick stainless steel surface has a vintage manually brushed finish.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.
Disponibile per le seguenti collezioni
N01
The 2 mm thick eco-touch surface is a mixture of organic origin and 100% natural (cork, jute, linseed oil).
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150 ° C) process.
Disponibile per le seguenti collezioni
N02
The 2 mm thick eco-touch surface is a mixture of organic origin and 100% natural (cork, jute, linseed oil).
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150 ° C) process.
Disponibile per le seguenti collezioni
S06
Laminam IN-SIDE is a state-of-the-art ceramic paste whose surface colouring permeates its entire thickness. The surface is scratch-proof and the ceramic layer is coupled to a fibreglass panel to increase its resistance to impact and breakage.
Disponibile per le seguenti collezioni
S07
Laminam IN-SIDE is a state-of-the-art ceramic paste whose surface colouring permeates its entire thickness. The surface is scratch-proof and the ceramic layer is coupled to a fibreglass panel to increase its resistance to impact and breakage.
Disponibile per le seguenti collezioni
S08
Laminam IN-SIDE is a state-of-the-art ceramic paste whose surface colouring permeates its entire thickness. The surface is scratch-proof and the ceramic layer is coupled to a fibreglass panel to increase its resistance to impact and breakage.
Disponibile per le seguenti collezioni
L13
Disponibile per le seguenti collezioni
L14
Disponibile per le seguenti collezioni
L15
Disponibile per le seguenti collezioni
L16
Disponibile per le seguenti collezioni
Y41
La superficie in legno naturale di spessore 0.6mm è protetta da una verniciatura all’acqua antigraffio.
Il supporto in HPL (high pressure laminates) è un pannello costituito da strati di fibre di cellulosa impregnati con resine termoindurenti sottoposti ad un processo ad alta pressione (90 Kg/cm²) ed alta temperatura (150 °C).
Disponibile per le seguenti collezioni
Frames
C12
(RAL 9003) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.
Disponibile per le seguenti collezioni
C21
(RAL 7044) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.
Disponibile per le seguenti collezioni
C23
(RAL 7030) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.
Disponibile per le seguenti collezioni
C30
(RAL 7022) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.
Disponibile per le seguenti collezioni
C08
(RAL 9005) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.
Disponibile per le seguenti collezioni
C18
(RAL 6013) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products
Disponibile per le seguenti collezioni
C26
Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.
Disponibile per le seguenti collezioni
C29
Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.
Disponibile per le seguenti collezioni
C37
Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.
Disponibile per le seguenti collezioni
C38
Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.
Disponibile per le seguenti collezioni
C42
Disponibile per le seguenti collezioni
C40
Disponibile per le seguenti collezioni
C41
Disponibile per le seguenti collezioni
C90
(RAL 1035) Componenti metallici (acciaio e alluminio) verniciati a polveri. La verniciatura a polveri si utilizza in ambito industriale per rivestire le superfici metalliche a scopo decorativo e protettivo. Consiste nel ricoprire le superfici di un film omogeneo di particelle attraverso l’attrazione elettrostatica e successivamente di scaldare il componente in modo da fondere e polimerizzare le polveri. Rispetto alla verniciatura e liquido, questo tipo di lavorazione presenta una maggior resistenza meccanica e alla corrosione, una scarsa infiammabilità e un’elevata precisione nell’applicazione. Le vernici in polvere utilizzate sono composte da pigmenti e resine termoindurenti, totalmente atossiche e prive di solventi. Per questi motivi la verniciatura a polveri si può considerare una lavorazione eco-friendly e a basso impatto ambientale.Tutti nostri componenti che vengono ordinati per esterni, subiscono l’ulteriore lavorazione di “cataforesi” per aumentarne la resistenza alla corrosione. La maggior parte delle nostre colorazioni sono codificate nella gamma internazionale RAL, in modo da aiutare il progettista nell’abbinamento con altri prodotti.
Disponibile per le seguenti collezioni
C70
Disponibile per le seguenti collezioni
C71
Disponibile per le seguenti collezioni
C72
Disponibile per le seguenti collezioni
C73
Disponibile per le seguenti collezioni
C74
Disponibile per le seguenti collezioni
C75
Disponibile per le seguenti collezioni
C76
Disponibile per le seguenti collezioni
C77
Disponibile per le seguenti collezioni
C78
Disponibile per le seguenti collezioni
C79
Disponibile per le seguenti collezioni
C80
Disponibile per le seguenti collezioni
C81
Disponibile per le seguenti collezioni
C82
Disponibile per le seguenti collezioni
C83
Disponibile per le seguenti collezioni
C84
Disponibile per le seguenti collezioni
C85
Disponibile per le seguenti collezioni
C86
Disponibile per le seguenti collezioni
C87
Disponibile per le seguenti collezioni
C88
Disponibile per le seguenti collezioni
C89
Disponibile per le seguenti collezioni
LEGEND
